Spalding M890001 - Manual (Page 10)

ID# M890001 09/06 10
Corner Location 3: 44" FAN MOLDED PLASTIC BOARD ASSEMBLY
Pole bracket will need to be lightly pressed into
backboard ribbing. Be sure to press completely into
place. Attach rim (25) to backboard and pole bracket
(26) with knob (6), reinforcement bracket (1), and
carriage bolt (10) as shown. Tighten knob
completely.
10
6
33
26
25
Attach board assembly to pole with carriage
bolts (12) and knobs (6) as shown. Install pole
cap (21) as shown.
6
12
21
1.
2.
24
29
Corner “2”
73256
Corner “4”
80602
Corner “3”
61259
Corner “1”
9H235A
Display Stand - Top View
3-1/2" 3"
3-1/2" 3-1/2"
BOARD STYLE
MAY VARY.
NOTE:
KNOB MUST BE TIGHTENED
COMPLETELY AND CHECKED
FOR TIGHTNESS BEFORE
EACH USE.
WARNING!
PRESS BRACKET (26)
INTO PLACE HERE
6