Sony VPD-MX10 - Manual (Page 27)

27 GB
The INPUT SETTING Menu
Ad
ju
st
m
e
n
ts
and
S
e
tti
n
g
s
U
s
in
g t
h
e M
e
n
u
COLOR SYS (System)
Selects the color system of the input signal.
• AUTO: NTSC
3.58
, PAL, SECAM and
NTSC
4.43
(switched automatically)
• PAL-M/N: PAL-M/PAL-N and NTSC
3.58
(switched automatically)
Normally, set to AUTO. If the picture is
distorted or colorless, select the color system
according to the input signal.
VOLUME
Adjusts the volume. The volume can be
adjusted for each of INPUT A, INPUT B,
MS, VIDEO and S VIDEO input.
The INPUT SETTING
Menu
The INPUT SETTING menu is used to
adjust the input signal.
Items that cannot be adjusted depending on
the input signal are not displayed in the
menu.
For details on the unadjustable items, see
page 40.
When the video signal is input
When the RGB signal is input
DOT PHASE
Adjusts the dot phase of the DMD
TM
panel
and the signal input from the INPUT A
connector.
Adjust the picture further for finer picture
after the picture is adjusted by pressing the
APA key.
Adjust the picture to where it looks clearest.
MENU Items
INPUT SETTING
SHIFT:
ASPECT:
VIDEO
H : 2 0 0 V : 3 0
4 : 3
N o . 0 1
VIDEO/60
Memory
No.
Signal
type
INPUT SETTING
DOT PHASE:
SIZE H:
SHIFT:
SCAN CONV:
INPUT-A
1 5
8 0 0
H : 2 0 0 V : 3 0
ON
N o . 1 3
640 480
Memory
No.
Signal
type