Sharp 20F640 - Manual (Page 8)

3 2 1
6 5 4
9 8 7
100 0
TV • CATV • VCR • DVD
A B C D
PERSONAL PREFERENCE
9 VCR-CH 8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L STOP FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
; :
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE g SKIP f
8
Dimension: 140mm x 215mm
Quick Reference Control Operation
• Part Names
Quick Reference Control Operation (Continued)
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
POWER
Press
→ On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
MUTE
Press
→ Mutes sound.
Press again → Restores sound.
• When sound is muted, CLOSED
CAPTION appears if available.
POWER (DVD/VCR)
Press
→ On.
Press again → Off.
DVD/VCR CONTROL
(See page 40.)
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR
→ Signals sent will be for
TV and VCR control.
Press CATV/DVD
→ Signals sent will be
for cable TV converter and DVD control.
DISPLAY
Press
→ Displays receiving channel for
4 seconds.
Press again
→ Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press
→ Switches to external video
INPUT 1 mode.
Press twice
→ Switches to external video
INPUT 2 mode.
Press 3 times
→ Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times
→ Switches back to the
original TV mode. (See page 38.)
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels, when
using the REMOTE KEYPAD button.
(See page 40.)
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
• See pages 30–32 for Channel Setting.
• Moves the “E” mark on the MENU
screen
SKIP/VCR-CH
(See page 40.)
REC
(See page 40.)
20F640 8