Sanyo Vizzon DP50747 User Manual
Page 9
9
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
DVD OR VCR CONNECTED TO VIDEO1 JACKS
DVD or VCR
1
AV
JACKS
S-VIDEO
JACK
(OPTIONAL)
2
2
REMOTE CONTROL
3
DTV AV (VIDEO 1)
INPUT JACKS
1
Connect a Composite Cable to the VIDEO1
Yellow, White, and Red AV jacks as shown.
2
2
OPTIONAL
Connect DVD to the DTV S-Video In Jack, if avail-
able on your external equipment.
Note: S-Video jack connection overrides a Video jack
connection (VIDEO 1).
3
Press INPUT to select Video 1 to view the DVD
or VCR program.
IMPORTANT FACTS:
Don’t be confused by the phrase “Available in
High-Definition.” Composite jacks offer only 480i
(SDTV) resolution.
BACK VIEW OF DTV
1
STEREO AMPLIFIER CONNECTED TO
ANALOG AUDIO OUT JACKS
OPERATING TIPS:
■
Position your DTV at least 2 feet from stereo
speakers. The magnets in the speakers may
affect the picture quality.
■
For Mono VCR (Single Audio Jack), connect VCR
Audio Out to DTV Audio (L) Input.
■
“No Signal” will appear randomly on the screen
when no signal is detected at the VIDEO1 video
jack.
1
Connect a Stereo Amplifier to the DTV Audio Out
jacks as shown.
Note:
Do not connect external speakers directly to
the DTV.
CONNECTING A STEREO
AMPLIFIER TO THE DTV
AUDIO OUT (FIXED ANALOG) JACKS
VIDEO 1 (COMPOSITE-YELLOW)—
A
Good Picture
or
(S-VIDEO)—
A Better Picture
CONNECTING A VCR OR DVD TO THE DTV
STEREO AMPLIFIER
VIDEO 1 (Continued on page 10)