Sony VRD-VC30 - Manual (Page 34)

34
8
Press the (Eject) button.
A message asking whether to finalize the disc just recorded on appears.
9
Select whether to finalize the disc.
For details on finalizing discs, see “What is ‘finalize disc’?” (page 46).
To finalize the disc:
Select [Yes] and press the
(Select) button. A confirmation message will
appear, so select [Yes] and press the (Select) button again. Disc
finalization will begin, and the process may take a few minutes.
When finalization is finished, the disc is ejected and the video DVD is
completed. You can now play the disc on DVD players or the DVD drives
of computers.
To not finalize the disc:
Select [No] and press the
(Select) button. The disc will be ejected
without finalization. This disc is not completed yet, and it cannot be played
with other DVD players or DVD drives of computers.
Hint
If you eject a disc without finalizing after videos have been recorded, you can add videos
onto the same disc later.
To stop recording
You cannot stop while recording is in progress. You can only stop recording
by pressing the
(Stop) button after a disc becomes full.
Note on Incremental Recording
Always use the 1 (Power) button to turn off the DVDirect after Incremental
Recording is finished. If you turn off the power by pulling out the AC power
cord, the DVDirect will not be able to detect newly taken video properly, and
Incremental Recording will not be possible the next time you attempt to
perform it.