Sceptre Technologies X46 User Manual
Page 22
- 22 -
www.SCEPTRE.com
SCEPTRE X46 HDTV User Manual
Connecting Cable or Satellite boxes with HDMI…
1.
Make sure the power of X46 LCD HDTV and your set-top box is turned off.
2.
Connect a HDMI cable to the HDMI output of your set-top box and the other end to the
HDMI port on the back of your X46 LCD HDTV.
3.
Turn on the X46 LCD HDTV and your set-top box.
4.
Use the remote control’s source button or the source button on the TV to switch to HDMI.
Please Note :
•
Please reference the set-top box’s manual, to make sure the set-top box is
configured to output correctly to the TV.
•
Sceptre’s X46 LCD HDTV supports SONY’s universal remote code.
Please look up SONY’s codes in your universal remote’s hand book.
Connecting to a PC with VGA and 3.5 mm minijack …
1.
Make sure the power of X46 LCD HDTV and your PC is turned off.
2.
Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the
other end to the VGA port on the back of your X46 LCD HDTV.
3.
Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end
to the VGA Stereo Input port.