Section 13: health and safety information, Getting he most out of your reception – Samsung A847M User Manual
Page 123
 
Health and Safety Information 116
Section 13: Health and Safety Information
Getting the Most Out of Your Reception
Keeping Tabs on Signal Strength
The quality of each call you make or receive depends on the signal strength in your area. Your phone informs 
you of the current signal strength by displaying a number of bars next to the signal strength icon. The more 
bars displayed, the stronger the signal. If you’re inside a building, being near a window may give you better 
reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically 
activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by 
pressing any key. Anytime the Power Save feature is activated, No Service and an Antenna icon display on 
the screen. When a signal is found, your phone returns to standby mode. 
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radio 
frequency (RF) signals. When you use your phone, the system handling your call controls the power level. 
This power can range from 0.006 watts to 0.2 watts in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP standards described below. In 1991-92, the Institute 
of Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) joined in 
updating ANSI’s 1982 standard for safety levels with respect to human exposure to RF signals. More than 120 
scientists, engineers and physicians from universities, government health agencies and industries developed 
this updated standard after reviewing the available body of research. In 1993, the Federal Communications 
Commission (FCC) adopted this updated standard in a regulation. In August 1996, the FCC adopted hybrid 
standard consisting of the existing ANSI/IEEE standard and the guidelines published by the National Council 
of Radiation Protection and Measurements (NCRP).