Swann 1060 - Manual (Page 2)

2 7
Introduction
This package comes with...
Opening the 1060 Housing
Installing a Camera
Connecting your Camera
Connecting the Heater / Blower Power
Mounting the 1060 Housing
Technical Specifications
Help Desk / Support Details
Warranty Information 2
2
3
4
5
6
7
7
Back Cover
Back Cover 2
2
3
4
5
6
7
7
Back Cover
Back Cover
The Swann Camera Housing is designed to keep your CCTV camera
safely enclosed to minimise the risk of damage by vandals or storms, and also
from being affected by inclement weather. Its flexible design allows it to
accommodate most CCTV cameras currently available.
The 1060 Housing also comes equipped with a low voltage heater bar and
cooling fan to assist with keeping your images clear during periods of poor
weather.
1060
INTRODUCTION
INDEX
This package comes with...
• 1 x CCTV Camera Housing
• 2 x Cable Seal Plug with Rubber Grommet and Locking Nut
• 1 x Camera Mounting Screw
• 2 x Camera Base Plate Mounting Screws
• 1 x Imitation Camera Fascia
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
Specification of Housing
Specification of Heater / Blower
5½ 4 /
2 ” ~ mm
/
1
1
3
8
Camera Opening Diameter:
Material:
Power Requirement:
Temperature Activation:
Hot Weather:
Cold Weather:
¾ 72
Case ~ Powder Coated Aluminium
Camera Opening ~ ” (3mm) Glass
Camera Mounting plate ~ Impact Resistant Plastic
Volt DC ~ amp (500mA)
The fan or heater will activate automatically at the
following temperatures. The fan and heater do not both run at the same time.
Fan on at 98.6°F (37°C)
Heater on at 59°F ( °C)
12 0.5
15
Dimensions:
Weight:
(L x W x H): ~ 400mm x mm x mm
3¼lb ~ 1.5Kg (without camera)
15¾”x ”x ” 140 112
Technical Specifications
Mounting the 1060 Housing
Using the built in adjustable
mounting points you can mount the
1060 Housing on a stand, pole or
wall bracket. For alternative
mounting options, the Universal Tilt
and Swivel stand is available for
separate purchase. Product code
SW-A-CBI. Check with your local
retailer for more details.