Sanyo PLC WTC500L - Manual (Page 44)

44
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Level Selection on page 41.
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Reset
Store
Exit the Image Adjust Menu.
Quit
Image Level Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
Store icon
A confirmation box
appears and then
select [Yes].
Image Adjustment