SBC comm SBC-6020 - Manual (Page 13)


Volume setting for base
You also can set the volume for the melody.
1. Go to
“Base Settings” menu. Press the OK key (Soft Key 1 ).
2. Choose “Base Ring Tone”. Press the OK key (Soft Key 1 ).
3. Choose “Volume”. Press the OK key (Soft Key 1 ). The display
will show the previously stored volume level.
4. Choose from volumes 1 through 9. Press the OK key (Soft Key 1 )
to confirm.
Melody setting for base
You can choose from 9 different ring melodies.
1. Go to the
“Base Settings” menu. Press the OK key (Soft Key 1 ).
2. Choose “Base Ring Tone”. Press the OK key (Soft Key 1 ).
3. Choose “Melody”. Press the OK key (Soft Key 1 ).
4. Choose from melodies 1 through 9. Press the OK key (Soft Key 1
) to confirm.
G
et
ti
n
g
S
ta
rt
ed