Sunbeam SMW978 - Manual (Page 11)

10
cooking time is returned to display.
·Touch TIMER and then touch RESET
to cancel TIMER during timing
process.
SETTING COOKING TIMES AND
POWER LEVELS
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one seconds to 99 minutes and 99
seconds. If you are setting a time greater
than one minute, you must enter
numbers for both minutes and seconds.
For example, to set 20 minutes, enter
2,0,0,0.
2. If you want to set a power level other
than 100% power, touch POWER, then
use the number pads to enter the power
level. You can set the power level
from 1 to 9.
3. Touch START/STOP to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage
Cooking”.
DO NOT TOUCH START/STOP PAD.
2. SET STAGE 2:
Touch COOK pad then enter proper
cooking time and (lower) power level.
(Most 2-stage recipes use lower
power
for second stage.)
3. Touch START/STOP pad.
NOTE:
After stage 1 time has elapsed, one
beep sounds, signaling the beginning
of
stage 2. After total time has elapsed, 4
beeps sound and END appears in
display. Touch RESET pad or open oven
door to clear END before starting
another cooking function.
SETTING “SPEED DEFROST”
1. Touch SPEED DEFROST pad.
2. Enter desired defrosting time by
touching correct number pads. Digital
timer sets minutes and seconds from
left to right so a single digit can be set
(5 for 5 seconds ) or up to 4 digits
(2405 for 24 minutes 5 seconds).
3. Touch START/STOP pad.
NOTE:
·After time has elapsed four beeps
sound and END appears in display.
Touch RESET pad or open door to
clear END before starting another
cooking function.
·After setting SPEED DEFROST, oven