Sony NSZ-GT1 - Manual (Page 3)

3
NSZ-GT1
4-196-880-12(1)
C:\work\btv\ReferenceGuide\Eagle_rev0614\4196880121\4196880121NS
ZGT1U2\020WAR.fm masterpage:Right
Important Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near
water.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of
the polarized or grounding-type
plug. A polarized plug has two
blades with one wider than the other.
A grounding type plug has two
blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety. If the
provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10)Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles,
and the point where they exit from
the apparatus.
11)Only use attachments/accessories
specified by the manufacturer.
12)Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13)Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14)Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
Precautions
On placement
• Place the unit in a location with
adequate ventilation to prevent heat
build-up in the unit.
• Do not place the unit on a soft surface
such as a rug that might block the
ventilation holes.
• Do not place the unit and AC adapter
in a location near heat sources, or in a
place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place the unit outdoors, in
vehicles, on ships, or on other vessels.
• If the unit is brought directly from a
cold to a warm location, or is placed in
a very damp room, moisture may
condense on the lenses inside the
unit. Should this occur, the unit may
not operate properly. In this case,
remove the disc and leave the unit
turned on for about half an hour until
the moisture evaporates.
• Do not install the unit in an inclined
position. It is designed to be operated
in a horizontal position only.
• Do not place metal objects in front or
on the left side of the unit. It may limit
reception of radio waves.
• Do not place the unit in a place where
medical equipment is in use. It may
cause a malfunction of medical
instruments.
• If you use a pacemaker or other
medical device, consult your
physician or the manufacturer of your
medical device before using the
wireless LAN function.
• Do not place heavy or unstable
objects on the unit.
• Do not insert any objects other than
discs inside the disc slot. Doing so
may cause damage to the unit or the
object.
• Take out any discs when you move the
unit. If you don’t, the disc may be
damaged.
• Disconnect the AC power cord and all
other cables from the unit when you
move the unit.
• During operation the AC adapter has
to be placed on a surface with LED
side up and label side down.
010COV.book Page 3 Thursday, June 17, 2010 4:17 PM