SIIG 04-0600B User Manual

Page 6

Advertising
background image

6

3.

Engage the hex key hole nut into the key hole slot.

4.

Put tension on the assembly by gently pulling back on

the speaker mount post while tightening the

8-32 x 5/8" machine screw, see Figure 4 on page 5.

5.

The hex key hole nut will engage on the housing in the

key hole slot.

6.

If the post does not tighten securely against the

housing, it will be necessarry to use the M5 x 1/8"

plastic washer as a spacer under the head of the

8-32 x 5/8" machine screw, see Figure 4 on page 5.

2/4 Hole Mounting

1.

Find the best mounting configuration that matches

your speaker enclosure. Four-hole mount patterns

can be accomodated by positioning the speaker plate

diagonally, see Figure 5 on the next page.

2.

Using the 1/4"-20 x 1/2" machine screws, install the

speaker plate and secure the speaker enclosure, see

Figure 5 on the next page.

Advertising