Sony NAV-U NV-U84 - Manual (Page 43)

43
Activating the Bluetooth signal
1
In the menu display, touch , then “Bluetooth.”
2
Select “Bluetooth Signal,” then “ON.”
The signal is activated.
The Bluetooth indicator lights up in blue.
Pairing with a cellphone
Pairing is required only the first time you connect to a cellphone.
To pair this unit to a cellphone, you need to enter the same passkey* on this unit and on the
cellphone. The passkey can be either your own selected number or the number determined by the
cellphone.
For details, see the manual of the cellphone.
* Passkey may be called “passcode,” “PIN code,” “PIN number,” “password,” etc., depending on the
cellphone.
Searching from this unit
The procedure to search for a cellphone from this unit is explained below.
Check that the cellphone is set to allow for searching (discoverable) beforehand.
1
In the menu display, touch , then “Bluetooth.”
2
Select “Add Devices.”
A message asking you to set the cellphone to discoverable appears.
3
Select “OK.”
After search is complete, the list of detected devices appears.
To list devices by address, select “Address.”
To list by name, select “Name.”*
* The address appears instead of the name if unavailable.
4
Select the cellphone to register.
Pairing starts.
5
Enter the passkey.
Perform the required operation also on the cellphone.
A message appears stating that the pairing is complete.
continue to next page r