Sharp HTSL70 - Manual (Page 6)

9
1
7
6
5
4
3
2
1
9
HT-SL70
E-5
2011 March 15
● Use the unit on a firm, level surface free from vibration.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the system.
● Do not expose the unit to moisture, to temperatures
higher than 140
°F (60°C) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power cord from the AC outlet and replug.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing it
from the AC outlet, as pulling the cord can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
● This unit should only be used within the range of
41
°F - 95°F (5°C - 35°C).
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result in
a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
Precautions
● Please ensure that the equipment is positioned in a
well-ventilated area and ensure that there is at least
4" (10 cm) of free space along the sides, top and back
of the equipment.
General
ACTIVE SUBWOOFER SYSTEM HT-SL70
4" (10 cm)
4" (10 cm) 4" (10 cm)
4" (10 cm)