Spalding M8554411 - Manual (Page 5)

5 09/05 ID# M8554411
Ensure ground is level with playing surface, then dig pole hole.
Install threaded ends of J-bolts (19) through holes
in mounting plate (2) and secure as shown.
2
25
25 25
19
19
Install nut (25) to J-bolt (19) as
shown. Repeat procedure for
remaining three J-bolts (19).
2.75”
(7 cm)
CONTACT UTILITIES
BEFORE DIGGING.
WARNING!
24" (61 cm)
48" (121.9 cm)
PLAYING SURFACE
GROUND SURFACE
24" (61 cm)
48" (121.9 cm)
IMPORTANT!
Make sure nuts (25)
are 2.75” (7 cm) from
top of J-bolts
Make sure J-bolts (19) are in the illustrated position.
Nuts on the top of plate are used for leveling the pole after
system is fully assembled.
NOTE:
1.
3.
2.