Sony DAV-DZ210D - Manual (Page 53)

T
u
ner Fu
ncti
ons
53 GB
but “%” does not appear in the front panel
display). Depending on the DAB services
available in your area, this may take a few
minutes.
When scanning is complete,
“COMPLETE” appears in the front panel
display momentarily and an available
service component list is created.
Note
• If your country or region does not support DAB
broadcast, “NO SERVICE” appears.
• Do not press any button on the unit or remote during
DAB INITIAL SCAN. Scanning is interrupted and
service component list may not be created properly.
In this case, perform DAB INITIAL SCAN again.
• If you move to another area, repeat this procedure to
store the stations for your new area.
• This procedure clears all previously stored presets.
• This procedure does not create any presets.
Listening to a DAB station
1
Press FUNCTION repeatedly until
“DAB” appears in the front panel
display.
The last received station is tuned in.
2
Press TUNING + or – repeatedly to
select a station you want.
For continuous tuning, press and hold
TUNING + or –, then to release the button
to select the station you want.
When the system tunes in a station,
“TUNED” and “ST” (for stereo program or
joint (intensity) stereo program) appear in
the front panel display.
3
Adjust the volume by pressing
VOLUME +/–.
Note
• You cannot select a DAB station by the D.TUNING
button and number buttons (direct tuning).
• When tuning in a DAB station, it may take a few
seconds before you hear any sound.
• Primary service is automatically received when
secondary service ends.
Presetting DAB stations
You can preset 30 DAB stations.
1
Press FUNCTION repeatedly until
“DAB” appears in the front panel
display.
The last received station is tuned in.
2
Tune in the station you want to preset.
3
Press MENU.
4
Press X/x repeatedly until “MEMORY”
appears in the front panel display.
5
Press ENTER.
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
7
Press ENTER.
The station is stored.
8
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
Note
• You cannot preset the service component while
“TUNED” is not displayed.
continued