Sharper Image CA900 - Manual (Page 10)

4. Turn the dispenser over and depress the LOCKING TAB.
5. Carefully align the gel or lather valve with the center seal of
the dispenser.
6. Gently insert the can valve into the seal and release the
LOCKING TAB. (See Figure 3.)
Figure 3
7. Press firmly until the can locks into place.
Note: If the can valve is not properly inserted into the center seal,
gel will leak out of the unit.
Steps for Successful Hot Gel & Hot Lather Shaving
10
Locking Tab
Center Seal