Soho F1DS102P User Manual
Self help guide
®
Self Help Guide
TSG-UK-1-001 | www.belkin.com
| Page 1 of 1
®
Self Help Guide
IMPORTANT!
This Guide refers to the
following Products:
SOHO KVM Firmware Update Instructions
F1DS102P
PS/2 Only
Synopsis:
Please read the following carefully;
Requirements:
This guide will assist you in updating the firmware
of your Belkin OmniView SOHO KVM Switch.
Please be advised that firmware updates tend to
be to resolve specific issues and if there is any
doubt if the firmware will resolve your issue you
should check with Technical Support.
To perform the Firmware Upgrade successfully
you will need the following equipment;
• SOHO KVM
• 9 V DC 600mA KVM Power Supply (optional)
• RJ45-DB25 Flash Update Cable (supplied)
• PC with Win 98, ME,2000 or XP and Parallel Port
• Firmware Update File
• NTPDA Update
• 1 KVM Cable Kit (to connect to PC)
You will also need to ensure that any Firewall or
Anti-Virus Software is disabled on the Computer
from which you will be upgrading the Firmware.
F1DS102T
PS/2 & USB
TSG-UK-2-005 | www.belkin.com
| Page 1 of 4