Sharp Z-336J - Manual (Page 19)

5-2
Chapter 5: Installation
5
5-2 Installation of Z-336J
Board dimensions and assembled dimensions of the Z-336J are shown below.
Board dimensions
Assembled dimensions
- For details about assembly/installation dimensions, see the manuals below.
J-board Z-311J/312J User's Manual: Hardware Version.
J-board Z-313J User's Manual: Hardware Version.
J-board Z-511J User's Manual: Hardware Version.
Dimensions D and D2 correspond to D and D2 "board sizes" of the manuals above.
- Make sure to ensure there is conductivity between the installation metal and installation section.
5
5 100
180 170
110 5
[Unit: mm]
The dimensions on the left do not include metal fittings.
Boss hole: 4-
φ
4
25.0
D2
D2
D2
21.6
15.0
D
In the case metal fixing A is used.
* CPU board (when Z-311J/312J is mounted)
When installing the Z-336J under the CPU board.
* The CPU board can only be installed at the upper most position.
[Unit: mm]