2 connection, 1] connection of jw-20fl5, 1) connecting the transceiver cable – Sharp Z-336J User Manual
Page 27: 2 connection -2, 1] connection of jw-20fl5 -2
Advertising
6-2
Chapter 6: Connection/Wiring
6
6-2 Connection
[1] Connection of JW-20FL5
This paragraph describes how to connect 10BASE5 cable to the JW-20FL5.
(1) Connecting the transceiver cable
1
Slide the lock on the 10BASE5 connector (on the JW-20FL5) up.
2
Insert the connector so that the two locking posts on the cable connector match the holes on
the slide lock.
3
Slide the lock down to lock the cable connector.
Slide lock
RESET
JW-20FL5
RESET
Locking post
Locking post
Transceiver cable
RESET
Advertising