Sirius Satellite Radio DOT2 - Manual (Page 7)

[
Installation
] 
Cable Routing
When you have successfully mounted the antenna, you can begin the cable routing portion
of the installation. Separate antenna cable routing procedures are provided for each type of
vehicle:
Sedan/Coupe on page 7
Pickup Truck on page 8
SUV/Mini-Van on page 10
Convertible on page 11
Note that additional breakout illustrations for each step of the antenna cable routing proce-
dures can be found on the SIRIUS website at http://www.sirius.com. Click on the Install/Ac-
tivate link and then follow the link for the Car Installation Tips.
Sedan/Coupe Antenna Cable Routing Procedure
Figure 4 shows how the antenna cable should be routed from the antenna to your SIRIUS
radio in a sedan/coupe.
1. Feed Cable Under
Rubber Molding
Around Window
4. Route Cable from Trunk
Under Interior Trim, into
Cabin and Towards Front
of Vehicle
6. Bring Cable Out To
SIRIUS Radio
Location
5. Bring Cable out from
Trim and Route Under
Carpet to Dashboard
or Console.
2. Route Cable Out of
Window Molding and
Into Weatherstripping
Around Trunk Opening
3. Route Cable Along
Trunk Wall and Into
Cabin
•
•
•
•
Figure 4 Figure 4