Shure UC User Manual

Page 17

Advertising

ENGLISH

– 15 –

RECEIVER ANTENNA INSTALLATION

Rear Mounted Antenna Installation

Attach the supplied UHF antennas to the BNC connectors on the receiver back panel, as shown in Figure 23. For

best performance, point the antenna tips away from each other at a 90

angle (45

from vertical axis).

NOTE: For improved RF performance (3 dB additional gain), optional UA820A 1/2 wave antennas may be used.

REAR MOUNTED ANTENNA INSTALLATION

FIGURE 23

Front Mounted Antenna Installation

NOTE: The UA600 Front Mount Antenna kit is sold separately.

1. Insert the two bulkhead adapters through the larger holes on each side of the front panel, and secure them from

each side, using the supplied attaching hardware. See Figure 24.

UC4 RECEIVER

(TOP VIEW)

BULKHEAD

ADAPTER

БББ

BULKHEAD

ADAPTER

FRONT MOUNTED ANTENNA INSTALLATION

FIGURE 24

2. Connect antenna cables to the receiver and the bulkhead adapters, as shown in Figure 25.

БББ

ББ

UC4 RECEIVER

(TOP VIEW)

ANTENNA

CABLE

ANTENNA

CABLE

NOTE: Two cable clamps are included
with the supplied hardware kit. The
clamps allows the antenna cables to be
secured to the sides of the receiver.

FRONT MOUNTED ANTENNA CABLE CONNECTIONS

FIGURE 25

NOTE: Shure recommends connecting the bulkhead adapter and antenna cables before mounting the receiver in a
rack. Once the receiver is in the rack, it is more difficult to install the bulkhead adapters and antenna cables.

Advertising

Popular Brands

Popular manuals