Adjusting screen, Keystone adjustment, Zoom adjustment focus adjustment – Sanyo PLC-EF31NL User Manual
Page 22: Basic operation, Lens shift lens shift adjustment
22
KEYSTONE ADJUSTMENT
1
Press KEYSTONE
▲/▼ button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 39.) Keystone
dialog box appears.
2
Correct keystone distortion by pressing KEYSTONE
▲/▼ button
or POINT UP/DOWN button(s). Press KEYSTONE
▲ button or
POINT UP button to reduce upper part of image, and press
KEYSTONE
▼ button or POINT DOWN button to reduce lower
part.
Reduce upper width with KEY STONE
▲ button or
POINT UP button.
Reduce lower width with KEY STONE
▼ button or
POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1
Press ZOOM
▲/▼ button on Top Control or on Remote Control
Unit. Message “Zoom” is displayed.
2
Press ZOOM
▲ button to make image larger, and press ZOOM
▼ button to make image smaller.
1
Press FOCUS
▲/▼ button on Top Control or on Remote Control
Unit. Message “Focus” is displayed.
2
Adjust focus of image by pressing FOCUS
▲/▼ button(s) .
BASIC OPERATION
Message disappears after 4 seconds.
Lens shift
LENS SHIFT ADJUSTMENT
1
Press LENS SHIFT button on Top Control or on Remote Control
Unit. Message “Lens shift” is displayed.
2
Press POINT UP button to move image up, press POINT DOWN
button to move image down.