Sony DAV-D150G - Manual (Page 26)

26 GB
VIDEO Operation (Continued)
VIDEO Plus+ ® System recording
VIDEO Plus+ System greatly simplifies entering the
date, channel, start and end times of a Timer recording
by simply entering a PlusCode programming number.
The PlusCode programming numbers are published in
most TV guide magazines; they can vary from one to
nine numbers in length.
11
Make sure that TV channels have been tuned
and stored.
Insert a video cassette with protection tab into
your DVD/VIDEO receiver.
The video cassette should have the window side
facing up and the arrow facing away from you.
22
Press VIDEO PLUS.
33
Press D D or E E to select the recording type.
ONCE: To record once.
WEEKLY: To record at the same time every week.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
44
Press the numerical buttons to enter the
PlusCode programming number of the TV
programme that you wish to record.
If you make a mistake press F then enter the revised
number.
55
Press ENTER (OK).
The recording details of your programme will be
displayed.
If PLEASE CHECK is displayed it means that you have
entered the wrong PlusCode programming number,
entered the PlusCode programming number incorrectly or
the PlusCode programming number has been printed
incorrectly in the TV guide. If “- -” is displayed in “PR”, you
have to enter the programme number of the station you
want to record from.
If you want to record from either of the SCART
sockets or AV3 on the front, repeatedly press
INPUT SELECT for the correct display (AV1, AV2
or AV3).
66
Press G G and press D D or E E to switch PDC on or
off.
If you are recording from stations that do not broadcast PDC
switch PDC off! ( * symbol will disappear on the TV screen).
Remember only certain stations transmit PDC.
77
Press G G to select the recording speed and press
D D or E E if you wish to record in SP, IP or LP.
SP will produce improved picture and sound quality, how-
ever LP will provide twice as much recording time as SP.
88
Check that the timer event details are correct.
Press MENU (i) to save your settings.
If PLEASE CHECK is displayed, you have entered
incorrect information and will need to re-enter the
data.
9
Press MENU (i) to remove the menus.
If you want to make other VIDEO Plus+ system
recordings repeat stages 2 - 8.
1100
Press @ / 1 to switch your unit to Standby.
TIMER will appear in the DVD/VIDEO receiver’s
display while your DVD/VIDEO receiver waits to
make the recording.
If the DVD/VIDEO receiver is DVD mode, even with
the DVD/VIDEO receiver is power on, it will record
any timer programme. You can clear the recording
by pressing STOP during programmed recording.
Intelligent LP Recording
When you set the tape speed to “IP”, the DVD/VIDEO
receiver automatically switches to LP mode to allow
complete recording if there is not enough tape to record
the entire programme while timer- recording in SP
mode.
It is not possible to set the tape speed to “IP” with
“PDC” set to “ON”.
ONCE
REC OK i 0~9, VIDEO PLUS+
- - - - - - - - -
DAILY
REC OK i 0~9, VIDEO PLUS+
12345678 9
DAILY
REC OK i 0~9, VIDEO PLUS+
- - - - - - - - -
PR DATE T I M E
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
10 BBC1 12 SP 11 11 55 ~ : :
i
PR DATE T I M E
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
10 BBC1
PDC : ON
12 SP 11 11 55 ~ : :
i
PR DATE T I M E
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - SP
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
- - - - - - - - ~ : :
10 BBC1 12 SP 11 11 55 ~ : :
i