Operations, General, Basic.controls – Woodstock W1770 User Manual

Page 33

Advertising
background image

-31-

W1770 21" Bandsaw w/Foot Brake

O

PE

R

ATIO
NS

OPERATIONS

General

This machine will perform many types of operations

that are beyond the scope of this manual. Many of these

operations can be dangerous or deadly if performed incor-

rectly.

The instructions in this section are written with the under-

standing that the operator has the necessary knowledge

and skills to operate this machine.

If.at.any.time.you.are.

experiencing.difficulties.performing.any.operation,.stop.

using.the.machine!

If you are an inexperienced operator, we strongly rec-

ommend that you read books or trade articles, or seek

training from an experienced bandsaw operator before

performing any unfamiliar operations.

Above. all,. your.

safety.should.come.first!

READ.and.understand.this.entire.instruc-

tion.manual.before.using.this.machine..

Serious. personal. injury. may. occur. if.

safety.and.operational.information.is.not.

understood. and. followed.. DO. NOT. risk.

your.safety.by.not.reading!

Basic.Controls

Refer to

Figures.45–47.and the desriptions below to

become familiar with the basic controls and components

of your bandsaw.

Control.Panel

Power.Switch: Disables the ON and OFF button when the

key is turned to the "0" position. Enables ON and OFF but-

ton when the key is turned to "1" position.

ON.Button: Starts motor only if the OFF button is popped

out and power switch key is turn to "1" position.

OFF.Button: Disables the ON button. Enable the ON but-

ton by twisting the OFF button until it pops out.

Figure 45. W1770 control panel features.

On Button

Off Button

Power Switch

Key

Advertising