Sampo DVE-560 - Manual (Page 21)

19
ON-SCREEN DISPLAY (OSD)
p DVD OSD modes
Whenever the DISPLAY button is pressed, the OSD
mode changes among the following modes:
Mode 1
Only the status of pressed button and some special
playback messages are displayed. The OSD message
lasts only three seconds. For example, when the
OPEN/CLOSE button is pressed, the OSD message
becomes
Mode 2
Only title number, chapter number, and elapsed time are
displayed as shown below
Mode 3
Title number, chapter number, information of the sub-title
and the audio, and elapsed time are all displayed as
shown below
p CD/VCD OSD modes
The CD/VCD OSD modes are described as follows
When PBC is on
There are three OSD modes possible:
1 OFF mode – only display the function status of the
pressed button or some messages.
1 SINGLE ELAPSED mode – display elapsed time of
the playback sound track.
1 SINGLE REMAIN mode – display remaining time
of the playback sound track.
When PBC is off or CD playback
Two more OSD modes are available:
1 TOTAL ELAPSED mode – display elapsed time of
all disc.
1 TOTAL REMAIN mode – display remaining time of
all disc.
The mode is displayed on the left top screen corner and
time is on the left bottom screen corner as shown below
TITLE 002/04 CHAPTER 02/05
SUBTITLE 01/06:ENGLISH
AUDIO 1/4:AC-3 2CH ENGLISH
TIME 00:10:00
TITLE 002/04 CHAPTER 02/05
TIME 00:10:00
OPEN
TOTAL REMAIN
TIME 00:10:00