Sharp AL-2030 - Manual (Page 27)

25
4
Connecting a USB cable
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the
machine. Please purchase the appropriate cable for your computer.
1 Insert the cable into the USB
connector on the machine.
2 Insert the other end of the cable into your computer's USB port.
Using the machine as a network printer (AL-2040CS only)
1 Insert the LAN cable into the LAN
connector on the machine.
Use a network cable that is shielded.
2 Turn on the machine.
3 Insert the CD-ROM into your computer's CD-ROM drive.
4 Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM icon ( ).
In Windows 98/Me/2000, double-click "My Computer", and then double-click
the CD-ROM icon.
• USB is available with a PC/AT compatible computer that was originally
equipped with USB and had Windows 98, Windows Me, Windows
2000 Professional, Windows XP Professional or Windows XP Home
Edition preinstalled.
• Do not connect the USB cable before installing the printer driver. The
USB cable should be connected during installation of the printer driver.
• Interface cables for connecting the machine to your computer are not
included with the machine. Please purchase the appropriate cable for
your computer.
• If you intend to use the machine as a scanner, it must be connected to
your computer with a USB interface cable. The scanner function
cannot be used if the machine is connected with a LAN cable.
AL-2030_2040CS.book 25 ページ ２００７年４月６日 金曜日 午前１１時３２分