Sony DVP-NS3100ES - Manual (Page 20)

20
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through .
z Hint
If you have an AV amplifier that conforms to the
96 kHz sampling frequency, use connection
.
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** “DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
Components to be connected Connection Your setup (example)
TV (page 21)
Stereo amplifier (receiver) and two speakers
MD deck/DAT deck
• Surround effects:
– None
(page 22)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 81)
(page 23)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 81)
– DTS (5.1 ch) (page 81)
– Super Audio CD Multi channel (page 83)
or
AV amplifier (receiver) with digital input jacks
having a Dolby or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 81)
– DTS (5.1 ch) (page 81)
(page 24)
A D
A
B
C
D
D