Sony DAV-DX315 - Manual (Page 31)

31 GB
B
asic Opera
tions
Selecting the connected
component
You can use a VCR or other components
connected to the TV/VCR jacks on the rear
panel. Refer to the operation manual supplied
with the components for further information on
the operation.
Press FUNCTION repeatedly until “TV/
VCR” appears in the front panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
TV/VCR t AUDIO t …
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the TV/VCR jacks on
the rear of the unit or to the AUDIO IN jack on
the front panel. This is not a malfunction and
will depend on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1
Press FUNCTION repeatedly until “TV/
VCR” or “AUDIO” appears in the front
panel display.
2
Press AMP MENU.
3
Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press ENTER or
c.
4
Press X/x to select a setting.
• ATT ON: attenuates the input level. The
output level is changed.
• ATT OFF: normal input level.
5
Press ENTER.
The setting is reflected.
6
Press AMP MENU.
The AMP menu turns off.
Enjoying the Radio or
Other Components
FUNCTION
AMP MENU
X/x/c
ENTER