Heading care and cleaning help line – Sunbeam WF5900 User Manual

Page 11

Advertising
background image

9

Heading

Care and Cleaning

Help Line

If you have any additional questions about using the BRITA

®

Water Filter & Chiller, please call the

Sunbeam help line in Australia on 1800 025 059. In New Zealand, please call 0800 786 232.

• Do not use harsh detergents or abrasive

cleaners.

• Do not place any part of this appliance in a

dishwasher

• Wipe the base with a clean cloth or paper

towel.

• Wash the filtering tank in warm, soapy water

using a mild detergent.

• Wipe the inside of the filtered water tank

with a damp cloth which has been soaked
in soapy water.

• Do not immerse the base in water or any

other liquid.

• If the unit is to be moved or stored for a

prolonged period of time without being
used, we recommend that you drain the
internal tank of any water.

• Before using the water filter & chiller

again take out the BRITA Maxtra water
filter cartridge, clean the water tank and

repeat the steps as described on page 6
(“Preparing the BRITA Maxtra filter catridge
for use”).

Emptying the internal tank
• Switch off the appliance and unplug from

the mains

• Remove the lid and the filtering thank and

any water in the filtered water tank.

• Turn the appliance upside down to reveal a

drain plug located in the centre of the base.

• Using a $2 coin or a suitable screw driver,

turn the plug anti clockwise until it is fully
loosened. Please note that it cannot be
completely removed.

• Drain the tank.
• Insert the plug after draining and using

a $2 coin or suitable screwdriver, turn it
clockwise until it stops.

• Do not over tighten as this may damage the

plug.

For BRITA

®

filter cartridge and Memo

queries, contact BRITA

®

Consumer Care.

Australia
1300 557 762

New Zealand
0800 427 482

Advertising