Settings for the speakers – Sony 3-283-040-11(1) User Manual

Page 55

Advertising
background image

Dis

c

55

GB

[JACKET PICTURE]: The jacket picture (still
picture) appears, but only when the jacket
picture is already recorded on the disc (CD-
EXTRA, etc.). If the disc does not contain a
jacket picture, the [GRAPHICS] picture
appears.
[GRAPHICS]: A preset picture stored in the
system appears.
[BLUE]: The background is blue.
[BLACK]: The background is black.

x [PARENTAL CONTROL]

You can set the playback restrictions. For
details, see “Restricting Playback of the Disc”
(page 48)
.

x [DivX]

You can display the registration code for this
system.
For more information, go to
http://www.divx.com on the Internet.

x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)

You can set the [MULTI-DISC RESUME]
function to on/off.

[ON]: The system stores the resume points in
memory for up to 10 discs.
[OFF]: The system does not store the resume
points in memory. Playback restarts at the
resume point only for the current disc in the unit.

x [RESET]

You can return the [SET UP] settings other than
[PARENTAL CONTROL] to the default
settings. For details, see “Returning the
[SETUP] settings to the default” (page 88).

To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.

Note

• You cannot operate [SPEAKER SETUP] when you

connect headphones to the unit or surround amplifier.

x [CONNECTION]

If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.

[FRONT]

[YES]

[CENTER]

[YES]: Normally select this.
[NONE]: Select this if no center speaker is used.

[SURROUND]

[YES]: Normally select this.
[NONE]: Select this if no surround speaker is
used.

[SUBWOOFER]

[YES]

Note

• When you change the [CONNECTION] setting, the

[STANDARD] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to
[STANDARD].

x [DISTANCE (FRONT)]

When you move the front speakers and center
speaker, be sure to set the parameters of the
distance (A) from the listening position to the
speakers.
You can set the parameters from 1.0 to 7.0
meters

1)

(3 to 23 ft) for the front speakers, from

0.0 to 7.0 meters

2)

(0 to 23 ft) for the center

speaker.

Settings for the speakers

[SPEAKER SETUP]

SPEAKER SETUP

DISTANCE(FRONT):

CONNECTION:

DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE

FRONT:

CENTER:
SURROUND:

SUBWOOFER:

YES

YES
YES

YES

Advertising
This manual is related to the following products: