Shopsmith 555970 - Manual (Page 3)

MARK V – MOUNTED OVERARM PIN ROUTER 555970
3
is traced over the table pin, creating a fin-
ished piece that’s exactly the same size and
shape as the groove in your template or
fixture
• Remove the workpiece, replace with a new
blank and repeat the process above . . . as
many times as you like
Once you’ve made a template or fixture, cut
out as many parts as you like, then set the
template aside until the next time you want
to make more of the same project. It will be
ready when you are.
We know that you’re eager to get started us-
ing your Overarm Router, but please take the
time to read this manual before you begin.
Then keep it handy for future reference.
OVERARM ROUTER
SPECIFICATIONS:
Maximum router motor HP .......................... 3 hp
Diameters of router motors
accepted (round motors only) ................. 2-1/2" to 4"
Throat depth (router bit
centerpoint to Way Tubes)* ......... 10-1/2" to 18-1/2"†
Vertical motor travel (lever-controlled) ............ 3-1/2"
Maximum workpiece thickness ............. Approx 11"‡
Worktable size
(laminate-covered MDF) ....... 18-1/2" d x 28" w x 3/4"
Fence size (2) .......................... 13-1/4" w x 1-1/4" h
Guide pin diameters furnished ...... 1/4", 3/8" and 1/2"
Starter pin diameter furnished .......................... 1/4"
Maximum router bit diameter (with insert) ...... 1-3/8"
Maximum router bit diameter (without insert) ....... 2"
Dust port diameter ....................................... 2-1/4"
* With a 3-1/2" diameter router motor. Distances will
vary, depending on router motor diameter.
† Maximum dimensions, based on which set of four
Arm mounting holes are used
‡ Varies, depending on router motor and bit used
SAFETY
WARNING
Read this safety section and complete
the Assembly procedures BEFORE op-
erating your Shopsmith Overarm Pin
Router
Shopsmith’s MARK V-mounted Pin Router
offers many built-in safety features. How-
ever, the effectiveness of these features de-
pends on you. Power tool safety requires
good common sense, and misuse of this
tool can cause serious injury.
To protect yourself from injury:
• READ, UNDERSTAND AND FOLLOW
ALL the information in this Owners
Manual.
• Also, READ, UNDERSTAND AND FOL-
LOW ALL the information in the Own-
ers Manual that came with your router
motor.
• READ, UNDERSTAND AND FOLLOW
ALL the information in the MARK V
Owners Manual.