Samsung 180T - Manual (Page 9)

English 7
Français
Español
Deutsch
Italiano
English
Portuguese
Getting Help
If your monitor does not display an image, check your cable connections and refer to
“Troubleshooting” on page 17. If you experience difficulties with the quality of the displayed
image, run auto adjustment again and refer to “Adjusting Your LCD Monitor” on page 9 or
“Troubleshooting” on page 17.
Plug and Play
Our adoption of the new VESA
®
Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the LCD Monitor.
Auto Adjustment
Even though your computer system can recognize your new LCD Monitor system, the auto
adjustment function will optimize the display settings for use with your computer. Auto
Adjustment can be accessed through the OSD, see “Image Lock” on page 13 or use the direct
access instructions below:
1 Turn on your computer and monitor.
2 Push the AUTO button to open the Auto Adjustment OSD.
3 The screen will dim and you may notice small changes to the screen image.
Setting up your LCD Monitor
new_180T (E) body Page 7 Wednesday, December 6, 2000 10:08 AM