Samsung GH68-15049A User Manual

Quick start guide, Wep500, Check the accessories

Advertising
background image

Guide No.: GH68-15049A

07/2007. Rev. 1.1

Quick Start Guide

Bluetooth Mono Headset

WEP500

Thank you for purchasing the Samsung Bluetooth

Mono Headset WEP500. We hope you will be

delighted with its operation.

Take a moment before you get started to

familiarize yourself with your new headset.

Make sure you have the following items with your

headset:

Make sure you have the following items with your

headset:

Check the accessories

Check the accessories

Charge your headset

Charge your headset

Charge the headset's battery fully before using

the headset for the first time.

1

Put the headset in the supplied headset

cradle and close the cover.

2

Plug the adapter into the headset cradle’s

socket.

3

Plug the adapter into the electrical outlet.

4

Remove the adapter from the headset cradle.

• Charge the headset until the red light on the

headset turns to blue.

• The headset will be fully charged in

approximately 2 hours.

Before you can use your headset, you must pair it

with your phone.

Put your headset in

pairing mode

Turn on Bluetooth on your

phone and pair with headset

Test and use

Using your WEP500

See Features and Functions Guide

on the reverse side of this guide

for information on using your

WEP500.

• If you turn on the headset for the first time, it

proceeds into pairing mode immediately.

• If you have paired the headset with other Bluetooth

devices, make sure that the headset is off (see Turn

headset on/off on the reverse side of this guide).
Then press and hold the Multi-Function button until

the indicator light turns solid blue after blinking.

Before using your headset

Multi-Function

button

Earpiece

Secondary

microphone

Volume Up

button

NOTE:

The headset is not able to operate while charging.

Try to reconnect after charging is completed.

NOTE:

Your headset supports the Headset and/or Hands-Free

Profile(s).

Start here

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and
pair with headset
Test and use

Get connected in 4 quick steps

Headquarters:

1301 East Lookout Drive Suite 150

Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/

accessories

Customer Care Center:

1-888-987-4357

Volume Down

button

Primary

microphone

Indicator light
Charging contact

Headset cradle, Adapter, User’s Guide,

3 Earpiece Covers (Large, Medium, Small)

Headset cradle, Adapter, User’s Guide,

3 Earpiece Covers (Large, Medium, Small)

1

Set your Bluetooth phone to discover the

headset by following your phone's user guide.
Typically, the steps involve going to the Settings,

Connection, or Bluetooth menu on your

phone and then selecting the option to discover

Bluetooth devices.
Your phone will find the Samsung WEP500

headset.

2

Select Samsung WEP500.

3

When the phone asks if you want to pair with it,

confirm by selecting Yes or OK.

4

Enter the headset passkey or PIN, 0000.

Your phone and headset are now paired and

ready to make and receive calls. To confirm

they are operating properly, make a call:

1

Place the headset over your ear.

See Wear the headset on the reverse

side of this guide.

2

On your phone, make a call to the number

you want.

3

If your phone and headset are successfully

paired, you will hear ringing on the headset.

After you have successfully paired your phone

and headset, you do not need to repeat these

initial setup steps each time you use the

headset.

Advertising
This manual is related to the following products: