Solid State Logic XLogic Delta LINK MADI HD - Manual (Page 21)

17
General information
The Delta-Link MADI HD can work with Pro Tools ® HD systems running on a Windows PC or Macintosh OS X computer.
Using the Delta-Link MADI HD with the Pro Tools ® software is generally straightforward. However, there are a few points
to be aware of:
• The Delta-Link MADI HD appears in the Pro Tools ® software as four Digidesign ® 192 I/O units, except when operating
at 176.4 or 192kHz, in which case it appears as two Digidesign ® 192 I/O units.
• The MADI inputs and outputs appear in the Pro Tools ® software as Analogue or Digital (AES/EBU or ADAT) inputs and
outputs belonging to these four Digidesign ® 192 I/O units. Therefore, you will not find any MADI inputs or outputs listed
in the Hardware Setup page of the Pro Tools ® software (select Setup|Hardware ). Please use the inputs and outputs that
are listed, regardless of their denomination – they are really your MADI inputs and outputs – and do not select “None”.
6. Pro Tools
®
Software