Samsung SNP-1000A - Manual (Page 99)

5.6. Initialization Setting
95
5.6. Initialization Setting
Initialization Menu
① Power On Reset
Camera is initialized into the original status of power input.
➋
Initial Position
If you want to set the default direction of the camera so that the
camera faces that direction when the power is turned on, you can set
up the desired Pan and Tilt for the camera.
③ Factory Default Settings
Camera is initialized into the factory default settings.
Data including Preset is deleted. This function is used for
initialization all settings.
④ Camera Default Settings
If only the camera module is replaced due to camera module failure,
the new camera module can be set up with the settings of the old
camera module.
➎
Auto Refresh
The electric circuit and the status of the equipment parts within the
camera are optimized regularly. (The cycle can be set up.) If camera
faces toward a certain source of light or if the settings cannot be
kept because of the long time rotation filming of a certain area, the
Auto Refresh function is used to maintain and reset the existing