Smeg 129316 - Manual (Page 6)

129316
•
Packaging materials are environmentally friendly:
they can either be recycled, safely disposed of or
destroyed without any threat to the environment.
•
To be able to do this effectively all materials are
marked accordingly.
Be careful not to damage cabinet of the
appliance with a sharp object when
removing the packaging.
Before connecting the appliance, let it
warm up to room temperature (wait for two
hours).
Ventilation slots and openings on the appliance
front and rear wall should not be obstructed.
A - Evacuation dryer
•
Place the appliance in a well ventilated room with
a window or a built-in fan.
•
Connect the evacuation tube to the pre-prepared
opening.
•
Evacuation must not be connected to air duct
used as a chimney for exhaust gasses of
appliances using other combustion material.
B - Condensation dryer
•
Do not place the appliance in a room where there
is danger of freezing.
•
Location should be adequately ventilated. Room
temperature should always be between 0°C and
25°C since frozen water in the condensation
container or in the pump may damage the dryer.
6
Installation and connection
Removing wrapping
Selecting the
appropriate location of
the appliance