Bulb replacement -40 – Suzuki 2010 Grand Vitara User Manual

Page 289

Advertising
background image

7-40

INSPECTION AND MAINTENANCE

79K21-03E

Bulb Replacement

NOTE:
If it is difficult to replace headlight bulbs or
clearance light bulbs due to under-hood
components trust this job to your dealer.

Center Interior Light (if equipped)

64J159

Pull down the lens by using a flat blade
screwdriver covered with a soft cloth as
shown. To install it, simply push it back in.

The bulb can be removed by simply pulling
it out. When replacing the bulb, make sure
that the contact springs are holding the
bulb securely.

Rear Interior Light (if equipped)

64J160

Pull down the lens by using a flat blade
screwdriver covered with a soft cloth as
shown. To install it, simply push it back in.

The bulb can be removed by simply pulling
it out.

WARNING

• Light bulbs can be hot enough to

burn your finger right after being
turned off. This is true especially
for halogen headlight bulbs.
Replace the bulbs after they
become cool enough.

• The headlight bulbs are filled with

pressurized halogen gas. They can
burst and injure you if they are hit
or dropped. Handle them carefully.

CAUTION

The oils from your skin may cause a
halogen bulb to overheat and burst
when the lights are on. Grasp a new
bulb with a clean cloth.

CAUTION

Frequent replacement of a bulb indi-
cates the need for an inspection of
the electrical system. This should be
carried out by your SUZUKI dealer.

Wiper Blades: 3

Advertising