ScyTek Electronics ASTRA 4000RS - Manual (Page 23)

Page 20 - ASTRA/G55
Entering System Programming
The system programming is compatible with both the LCD transmitter or the standard AM transmitter.
To enter System Programming:
1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.
· The siren will provide three chirps, indicating that you have entered Programming.
3. Press the valet switch the number times equal to the System Parameter you want to change.
· The siren will chirp each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired operating mode for
that System Parameter.
· The siren will chirp to indicate the setting.
1 chirp = Button 1
2 chirps = Button 2
3 chirps = Button 3
5. When you are finished, turn off the ignition to save the changes.
Default Reset
Following this procedure will set all System Programming Parameters to factory default settings.
1. Enter System Programming.
2. Press Transmitter Button 3.
· The siren will chirp 6 times indicating that the reset signal was received.
· All System Programming parameters are now set to factory default settings.
· The Valet Mode is off.
3. Turn off ignition.
Programmable System Options
The following is a description of the programming options of the system. Some of the program branches
control more than one option, and may require accessing a particular branch number twice in order to
program all desired features.
1. Arm Mode. Selects between Manual and Passive Arming.
2. Auto Rearming Mode. When selected, the system will automatically re-arm and lock 30 seconds after
it is disarmed regardless if a door is open or closed.
3. Arming Chirps. Selects between normal and silent operation.
4. Warn-Away Pager Report. When Enabled, Warn-Away report will be sent to the pager. If Disabled
no Warn-Away report will be sent to the pager.
5. Extended Parking Lights. When Enabled, upon Disarming Parking lights will turn On for 30 seconds
or until the Dome light turns Off.
6. Ignition Door Locking / Override Code Set. This dual program branch selects Ignition Door
System Programming