Speco Technologies CVC6146SCFF - Manual (Page 16)

- 16 -
4. Select HSBLC(High Suppress Backlight Compensation) by using the Left and Right buttons then press the
Set Up button to set up the desired HSBLC area and GAIN level.
* Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to
return to EXPOSURE menu.
* LEVEL : Adjust the HSBLC sensitivity by selecting between 0~8.
* DEFAULT : Press the Default to return to the factory default when input the wrong data .
HSBLC OFF HSBLC ON
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
HSBLC
LEVEL
DEFAULT
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
RETURN
8
7
8
7
8
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.