Syncmaster 172x – Samsung 172x User Manual
Page 14
Advertising
Unpacking
Front
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
Connect the DC Adapter for your monitor to the power port on the back
of the monitor.
2. DVI port
Connect the DVI Cable to the DVI Port on the back of your Monitor.
3. Signal port
Connect the signal cable to the 15-pin, D-sub connector on the back of
your monitor.
Note:
See
Connecting Your Monitor
for further information regarding cable connections.
SyncMaster 172x
Advertising
This manual is related to the following products: