Speco Technologies LPRB922 - Manual (Page 8)

6. The horizontal angle should be less than 40 degrees. This camera is designed to
cover only one lane (less than 3 meters).
7. If using with a DVR, make sure the DVR has the de-interlace feature and the frame
rate is above 15 fps for optimal effect.
8. To ensure an optimal view, please adjust the lens under the conditions we suggest.
3.3 Camera Installation
1. Mark hole positions: use the mounting template to mark hole positions on the
desired location. If you want to mount the camera on a cement surface, insert the
plastic anchors into holes which you've drilled into the cement first.
2. Adjust the mounting angle: Loosen the left and right screws and rotate the
mount adjustment counterclockwise to adjust a desired angle for mounting.
Then, fasten the screws and rotate the mount adjustment clockwise to set desired angle.
Partial enlargement
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10