Sanyo HV-DX1E - Manual (Page 32)

Additional Operation - VCR part
32
Hi-Fi Stereo Sound System
Your DVD+VCR will record and play back Hi-Fi stereo
sound. In addition it has a NICAM digital stereo sound
decoder. This allows you to record and play back the
sound in several different ways. Video cassettes record-
ed on your DVD+VCR will have a normal mono audio
track and two VHS Hi-Fi stereo audio tracks. These
stereo tracks allow you to make audio recordings in Hi-
Fi stereo or bilingual mode from a TV broadcast, stereo
audio system, video disc or another Hi-Fi VCR.
11 Your DVD+VCR’s NICAM digital sound decoder
allows you to enjoy broadcasts with NICAM
sound, as well as standard stereo NICAM, bilin-
gual and mono sound.
The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
STEREO
Sound is automatically recorded on the Hi-Fi stereo
and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left) will
be recorded on the mono track of the video tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
2 2 Press AUDIO repeatedly until the desired audio
mode appears.
The choice is STEREO, LEFT (left channel),
RIGHT (right channel) and MONO.
In BIL NICAM playback the primary language is
output on the left channel and the secondary lan-
guage is output simultaneously from the right chan-
nel when audio output is set to STEREO.
The primary language will be output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO.
3 3 Press i to return to a TV picture.
Note
If the quality of stereo sound being received is
poor, the broadcast is automatically received in
monaural with better quality.
Still, if the quality of the sound is poor, set NIC in
the main menu to OFF (see p. 13). NICAM broad-
casts will be detected.
Widescreen Compatibility 16:9
Your DVD+VCR can record and play back widescreen
aspect ratio programmes (16:9). To record a wide
screen format programme successfully the correct type
of widescreen signal must be broadcast by the TV sta-
tion.
11 Press i and press F F or G G to select 16:9/4:3.
Press OK.
2 2 Press D D or E E repeatedly to select : AUTO, 4:3 or
16:9.
AUTO:
Automatically plays back Widescreen programmes as
Widescreen and Normal programmes as normal.
4:3:
Only for playing back and recording Normal format record-
ings (4:3).
16:9:
Only for playing back and recording Widescreen format
recordings (16:9).
3 3 Press i to remove the menus.
Note
To enjoy Widescreen playback you must connect your
DVD+VCR to the TV using a SCART lead.
STEREO
Pr-12
ACMS
16:9
4:3
REC SYS-
TEM
A B
C
OSD Dr.
VCR 1 2
TIME
DATE
OK i 16:9
4:3
SET
DPC
OSD
ON
OFF
OSD f NIC
P
R AUTO
4:3
16:9