Sanyo QWEST SCP-8300 - Manual (Page 231)

Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Ready Link contact:
1. Press R-Link (left softkey) or press .
2. Press Go to (left softkey), highlight Personal List, and
press .
3. Highlight <Add Contact> and press .
4. Enter a name for the new contact and press .
(This is the name you will see when calling or
receiving a call from the contact.)
5. Select R-Link Number, enter the contact’s 10-digit
Ready Link number (their wireless phone number)
and press OK (left softkey).
6. Press Save (left softkey) to save the new contact to
your Personal List.
Tip: You are not allowed to use the following symbols during step 4:
@ : ; / * ) (.
Ready Link
Section 2K: Using Ready Link 215