SUPER MICRO Computer SUPERSERVER 6014L-T - Manual (Page 101)

Appendix C: Software Installation
C-3
To run the Adaptec RAID Confi guration utility, do to the following:
1. Enable the RAID function in the system BIOS (refer to Chapter 7 for System
BIOS Confi gurations).
2. Press the <Ctrl> and <A> keys simultaneously when prompted to do so during
system boot. (Refer to the previous page for detailed instructions.)
Using the Array Confi guration Utility (ACU)
When you press <Ctrl> and <A> keys simultaneously at the prompt during system
bootup, the main menu will appear as seen below.
Note: To select an option, use the arrow keys to highlight the item and then press the
<Enter> key to select it. To return to the previous menu, press the <Esc> key.