Helpful hints (problems/solutions) – Sanyo CLT1554 CLT2054 User Manual
Page 19
Problem:
Check these Conditions:
Try these Solutions:
Page No.
TV turns off
automatically.
●
Check signal (Cable/Ant.) connection.
●
Power surge protection feature.
●
Press POWER key.
●
The sleep timer may have been set.
●
Unplug TV momentarily.
5
No picture, poor
picture, or wavy
lines in picture.
●
Check antenna connections.
●
May be station trouble.
●
Brightness or Contrast misadjusted.
●
Possible interference from household
appliance.
●
Adjust antenna.
●
Try a different channel.
●
Select AUTO from Picture/Sound
on-screen menu or press RESET key.
●
Turn off Mixer, Drill, Blender, etc.
6, 11
No sound, poor
sound.
No sound on
some channels.
●
May be station trouble.
●
May be MUTE function.
●
Check Audio / Video connections
●
Try a different channel.
●
Adjust Volume.
8~9
11
Picture too Bright
or too Dark.
●
Check Backlight (power energy
saving) settings.
●
Select Set-up Menu to set BACK
LIGHT option to Middle setting.
14
Cannot display
picture on a full
screen.
●
Check if Aspect Ratio setting is 16:9.
●
Select Set-up Menu to set ASPECT
RATIO option to 4:3 normal setting.
14
No Captioning.
●
Check if station is broadcasting a
Closed-Caption signal.
●
Press CAPTION key to select
Captioning.
15
Poor color or
no color.
●
Check if program is in color.
●
Check antenna connections.
●
Color or Tint misadjusted.
●
May be station trouble.
●
Try a different channel.
●
Adjust antenna.
●
Press RESET key to restart channel
search.
11
Blue Screen with
Video1, Video2, or
Component3
displayed.
●
Check Audio / Video connections.
●
Check external equipment.
●
Check external equipment setting.
●
check DVD setting.
●
Press INPUT key.
●
Switch on external equipment.
●
Set external equipment output con-
nections to match input connections.
8~10
No TV Stereo or
SAP sound.
●
Check if station is broadcasting a true
MTS stereo signal or a SAP signal.
●
Select STEREO or SAP from Audio
on-screen menu.
12
Cannot select or
scan some
channels.
●
Channel may be removed from
memory.
●
Check antenna connections.
●
V-Guide is set to block programming.
●
Select CH. SCAN MEMORY and
manually add channels or start
CH. (channel) search.
●
Set V-GUIDE to OFF or press RESET
key to clear all setting.
13
16~18
Remote Control
will not work TV.
●
Check batteries.
●
Check if TV is plugged in.
●
Check external equipment.
●
Replace batteries.
●
Aim remote control at front of TV.
6, 10
Menu System
words seem
misspelled.
●
May be a different language is
selected.
●
Reselect menu language choice using
the on-screen menu.
14
Cabinet makes
popping sound.
●
This is a normal condition during
warm-up and cool down of the plastic
cabinet parts.
Because of the Quality we build into our product, very few problems are actual TV defects. Most problems only involve
simple hookup or setup changes that can be solved by the customer. Please check the chart below and try the solutions listed
for your problem. If the problem still persists, before returning your TV, visit our website at www.sanyoctv.com or call us
toll free at 1.800.877.5032.
HELPFUL HINTS (Problems/Solutions)
19
N
Neeeedd hheellpp??
V
Viissiitt o
ou
urr W
We
eb
b ssiitte
e a
att
w
ww
ww
w..ssa
an
nyyo
occttvv..cco
om
m
o
orr C
Ca
allll
1
1--8
80
00
0--8
87
77
7--5
50
03
32
2