Summit FF-1074W - Manual (Page 9)

8
screw holes
doorstopper (right side)
middle pivot pin
central hinge
fig. # 2
English English
Reinstallation: (see fig. # 3 and fig. # 4)
1. Remove the lower pivot pin from the lower hinge by turning counter
clockwise. Move the pin to the opposite hole and tighten. (see below)
2. Tilt refrigerator on a 45-degree angle to have access to the
bottom front.
NOTE: Two People Required.
lower pivot pin
fig. # 3
bottom of unit
bottom hinge