Samsung SCC-C9302(F)P - Manual (Page 20)

38 39
CAMERA MENU Organization
E E
❖ 1. MOTION detection function operates based on the brightness change
within the setup region.
Therefore, erroneous operation may occur depending on the brightness
difference between the background and the object that is being taken,
or the status of the area setup, etc.
❖ 2. The followings may occur in a camera with built-in zoom.
- When the zoom rate becomes closer to the TELE side, the edges of the
screen may become dim.
- When connected to a DVR or an LCD monitor, the screen corners may be
obstructed.
PRESS THE
ENTER
BUTTON.
SIZE
LOCATION
(MOTION DET)
AREA USER...
SENSITIVITY L ---I--- H
RET
COLOR/BW turns IR(Infrared) Filter on or off. In the poor illumination environment, turns
IR Filter off to raise the sensitivity to the same level as an black-and-white camera while in the
good illumination environment, turns it on to convert to the COLOR mode in the normal screen
condition to lower the sensitivity.
COLOR
This is the IR Filter ON mode with a normal color screen.
You can press the [Enter] key to set the COLOR GAIN LEVEL. And when the AGC function
is on, you can set the AGC COLOER LEVEL.
COLOR/BW
PRESS THE
ENTER
BUTTON.
CAMERA ID ON...
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1...
FOCUS MODE ONEAF
ALARM SET ...
COLOR/BW COLOR...
PRIVACY ON...
SPECIAL ...
PRESET ...
EXIT QUIT
(COLOR)
GAIN (0)I--------
AGC COLOR (0)----I----
RET
00577A-SCC-C9302(F)P-E/R/P 9/30/06 10:54 AM Page 38