Swann SW244-8ML - Manual (Page 36)

SE
TUP
Press + buttons on remote controller to select PARAMETER in SETUP menu.
NOTICE
The configuration file “DVRParm.dat” should be saved into a “Parm” folder on the USB storage to
load parameter.
z LOAD
PARAMETER
Load parameter saved on the USB storage.
z SAVE
PARAMETER
Save the current parameter on the USB
storage.
Configuration file “DVRParm.dat” will be
saved in the “Parm” folder on the USB
storage.
z SET FACTORY
DEFAULT
Recover all the settings to the original
settings by a manufacturer.
PARAMETER